Lifting force of 45 to 200 lbs. per cartridge. Sizes range from 3/4 OD to 1 5/8 OD.
Spring loaded ball type die lifters permit easy die positioning using low friction roller bearings. To install, simply drill the required number of holes in the bolster considering die weight and size. A magnetic drill may be used for this purpose. To remove a cartridge simply place a screw in the threaded hole and extract.
T-slot mounted rail containing
spring supported die lifter cartridges.
Roller bearings permit easy die positioning in all horizontal directions.
Available in standard lengths of 7", 10", 11" or 12".
Available for .750, .812 and 1.00" wide T-slots.
Load capacities range from 400 lbs. to 1500 lbs. per rail.
Each rail may be adjusted for various slot depths.
Die lifter balls may be easily removed and replaced if necessary.